12 inch square

Should I Remove Snow From Roof?

Should I shovel the snow off my roof?

For those of you that are wondering “When should I shovel the snow off my roof?”

Please be aware of the potential dangers of shoveling or raking snow from a roof. Besides the potential damage to the roofing materials and structure, there are such factors as a person sliding off the roof.

Basic calculation – (for a quick analysis only) This calculation uses a 25% moisture density which may be conservative for our current snow fall. As a rule of thumb, saturated snow weighs about 20 pounds per cubic foot.

The moisture content of snow can range from about 1% to about 33% so snow can weigh from about 1 pound per cubic foot to over 21 pounds per cubic foot.

S=Inches of snow on the roof
1.25= Weight of 1 sq ft of snow for each 1” of depth
P= Pounds per square foot
Example:
If my roof has 20” of snow, what would that equate to?
(S)(1.25)=P
(20”)(1.25 lbs/sq ft) = 25 lbs/ sq ft
Any ice build-up on the roof needs to be added to this formula. Use 5.2 lbs for every inch in thickness.
In this example the roof would be ok.

You can always check your roof snow load yourself by weighing a one-foot (12”) X one-foot (12”)
square of snow cut from your roof.

To determine if your snow load is getting close to your design roof snow load of 40 lbs per square foot. This would include any ice build-up on the roof.
Notes:
1. Structures constructed with building permits are designed for 40 lbs/sq ft minimum roof
snow load. Older roofs may be of concern and may not meet this minimum roof snow load.

2. Until recently, manufactured homes were designed for a roof snow load of 30 lbs/sq ft.
Look at the certification label (a metal label affixed to the manufactured home) to verify your roof snow load.

3. Flat roofs are more of a concern (Less than 3/12 pitch). Flatter roof pitches tend to hold more snow moisture.

4. If we receive excessive rainfall, the weight of the roof snow can increase rapidly.

5. If your structure is in question, it is best to consult a licensed engineer.

In summary, the City does not make recommendations on when to remove snow from roofs.

It is up to the individual property owner to consider the benefits and dangers of snow removal and decide their own course of actions. Remember that, as a rule of thumb, saturated snow weighs about 20 pounds per cubic foot and then consider the depth and relative moisture content of your snow and the capacity of your roof structure in making your decision to remove snow or not.

This story is inappropriate and should be flagged for moderation. Please choose from one of the following options:

You have indicated this comment should be removed.

Close

The comment has been submitted for review. Thank you .

Ron says ... on Monday, Dec 22 at 1:40 PM

THANKS!...NO! Most roofs can hold 24 inches of powder except some flat ones

Spokane WA 2008 says ... on Thursday, Dec 25 at 5:25 PM

We had 32 inches in two days and even more over the course of a week. I just took snow off from the eve to just below the crown. My roof is only 4 years old on a 100 year old home.

Tom says ... on Friday, Dec 26 at 9:28 AM

That answer is copied and pasted rom the city of Coeur D Alene Idaho! where we anticipate snow loads every year. A 40 lb snow load as required by building permits MAY be a local building code. call your building department and ask questons.

Cathy says ... on Tuesday, Dec 30 at 6:23 PM

Thanks for the info, I'll be calling the building department. I was concerned about a care faucility in N. Spokane. When I asked the Administrator he said the roof is good for 6 feet, today he said 90 pounds.

KATU editor cont. says ... on Wednesday, Dec 31 at 5:44 AM

I would also add that we do not know how much more is ahead. Once snow packs to near saturation people will not be able to remove the heavy ice. Human nature to wait, see financial markets collapse for perspective, "it'l never happen"

Bill, Engineer in Olympia WA says ... on Thursday, Jan 1 at 12:00 PM

The statement "Structures constructed with building permits are designed for 40 psf minimum roof snow load" is NOT correct for Portland. Accordind to City of Portland Development Services, design roof snow load is 25 psf. Snow load varies by location

roof says ... on Saturday, May 2 at 1:16 PM

the removal of snow from the roof is very necessary to make the roof safer and to prevent any loss on roof Roofing

roof says ... on Saturday, May 2 at 1:20 PM

the snow acts like destroyer of the roof which increases the weight of the roof and make it very heavier and to avoid the access weight from the and to avoid damage of the roof cleaning is very necessary .Ro

jean-in-va says ... on Monday, Feb 8 at 4:47 AM

Feb 6 we had 30" snowfall in VA. 6" more is predicted Feb 9. We can't get up to remove snow off the roof. Would it help to heat the sun room which has a pitch of 1" every 12"?

WOW says ... on Thursday, Jan 10 at 2:24 AM

OCD was typing

Add a comment

Name:

Comment: 250 Characters Left

KATU.com and its affiliated companies are not responsible for the content of comments posted or for anything arising out of use of the above comments or other interaction among the users. We reserve the right to screen, refuse to post, remove or edit user-generated content at any time and for any or no reason in our absolute and sole discretion without prior notice, although we have no duty to do so or to monitor any Public Forum.